Minimum Engine Wear And Maximum Economy
Clean Engine has developed the most beneficial product available to the marine, trucking and or hydraulic industries, the patented Clean Engine Bypass Filtration System. The unit continually cleans and cycles your engines oil, increases the life of the engine, and reduces your maintenance costs.
The Reconditioner Bypass Oil Filtration System, is designed for easy installation and years of trouble-free operation. The purpose of this manual is to help you install the System correctly with as little time, energy, and thought as possible (if only tracking down an electrical problem on a rig was this easy!).
The Oil Reconditioner is a revolutionary bypass oil cleaning system. It does not replace the conventional OEM oil filtration system – it adds to it, and makes it work much better .
Engine oil is fed under pressure into the Oil Reconditioner filter and evaporation chamber by tapping into the engine’s oil line or pressure port. Solid contaminants down to one micron are first removed through the Oil Reconditioner’s filter. The filtered oil then enters the processing chamber where liquid contaminants (such as water and fuel) are evaporated and vented .
The clean oil is finally gravity-fed back into the engine’s oil supply, usually at the oil sump. Only a fraction of the total engine oil is cleaned in this bypass system at any given time, unlike the OEM full flow filter, which takes out coarser particles, whenever the engine is running. But all of the engine oil is eventually cleaned, over time.
The benefits of our Oil Reconditioner are numerous. These include extended oil change intervals, reduced engine wear, reduced oil purchases and disposal costs, increased engine power and performance as well as improved fuel efficiency. The addition of the Oil Reconditioner on your truck will begin paying for itself immediately.
Additional benefits include:
- Removes solid contaminants including wear metals, soot and dirt down to 1 Micron.
- Removes liquid contaminants such as Fuel, Water, Glycol, Corrosives and Acids.
- Reduces engine components wear and extends engine life 2 to 3 times.
- Reduces new oil purchases by up to 89%.
- Increases engine efficiency and reduces fuel consumption.
- Payback period 7 to 12 months
- Increases your bottom line
- Manufactured and assembled in the U.S.A.